What is shutter speed and how it affects video
How does shutter speed affect image quality and other image parameters?
In today’s post we will deal with the shutter speed also known as the exposure time of the photosensitive matrix
This term applies to both analog and digital photography – including video filming.
Exposure time is the shutter speed – time to expose a single photo or single frame of movie .
What is the shutter speed?
In a situation when the camera does not take a picture and the camera does not film, the shutter closes the access of light from the world to the inside of the camera or camera, otherwise the film would be exposed. A photosensitive film would become useless. In the case of digital matrices there is no such problem, but leaving the matrix in contact with the outside world will expose it to dirt and shorten the life time.
Pressing the shutter button opens it momentarily – just to take the picture and then it closes – remaining in the dark.
When we are dealing with a film – every second, 24 to 60 frames per second are taken, which is really individual photos later joining the film using software built into a digital camera or camcorder.
Thus, the length of time for which the light passing through the lens reaches the photosensitive material – analog or digital – the shutter speed is also known as the exposure time.
Does the shutter exist in digital photography and video cameras?
Basically Yes. Both in digital photography and video filming it is exactly the same parameter as in the case of analog film exposure.
The difference in construction is that the photosensitive material known from analog photography is replaced by a CMOS sensor or other type of electronic photo sensor with appropriate ISO sensitivity.
In what units do we express the shutter speed?
As we have already said, the most important parameter when analyzing the process of opening and closing the shutter is time. So it is not revealing that the unit of time is a second.
As for the order of magnitude of this time, it varies quite a bit – depending on the type of photography, movement of objects through the lens and of course lighting conditions.
The shutter can be expressed in fractional parts of a second, e.g. 1/2000 – means that in theory we could expose up to 2000 photos in one second – which is a very short time. On the other hand, there are projects where the shutter opens for a few seconds or even minutes – even in the case of astrophotography.
What are the best shutter speeds – optimal shutter speeds
The general rule is: increasing the exposure time (i.e. the shutter speed) makes the photo brighter because more light photons will go to the photosensitive material.
Reducing the exposure time makes the photo darker, until completely illegible – completely black.
In the case of photography in poor lighting conditions where the light is still lacking, we must increase the exposure time so that our image is visible.
For example, in the case of natural daylight, the exposure times are usually expressed in fractional seconds, e.g. 1/20 1.50 1/40 seconds – which is a standard in the most common conditions.
However, in difficult lighting conditions, i.e. photographing objects at night, the exposure time can be extended to up to several dozen seconds and in relative cases up to minutes.
It should also be remembered that the long exposure time requires accurate stabilization of the camera, we are not able to take a sharp photo. In the case of large exposure times in the photo or video we will see characteristic streaks, the so-called ghost effect.
If we photograph or film fast-moving objects, e.g. all kinds of dynamic sports, both motorsport and team games – the shutter speeds must be as low as possible.
however, too short exposure time results in dark and / or poorly visible pictures.
As it happens in photography – we have other ways to cope with the lack of light at a constant shutter speed.
How to increase the brightness of a photo or video with a fixed shutter speed parameter.
As it happens in photography – setting parameters is a system of connected vessels and the end result is a kind of compromise of these settings.
If we can no longer increase the shutter speed, e.g. due to the movement of the photographed object – we can change other parameters of the photographed object.
The first way is to increase the material’s (sensor) sensitivity, i.e. ISO.
The second way is to increase aperture.
We will discuss the pros and cons of modifying the above parameters in the next article.
Holden
1. Play with fractions: Don’t be afraid to experiment with different shutter speeds and see how they affect your images. Remember, it’s not just about getting the right exposure time – it’s about capturing the essence of a moment.
2. Pay attention to lighting conditions: Lighting is the unsung hero of photography. Learn to read the light in any given situation and adjust your shutter speed accordingly.
3. Don’t be afraid to go slow: Sometimes, slower shutter speeds can create beautiful effects like motion blur or creamy bokeh.
So, there you have it – my two cents on shutter speed. Take it for what it’s worth!
Adriel Ewing
Oh, how original. Experimenting with different shutter speeds is not exactly rocket science. In fact, it’s something that every beginner in photography learns within the first hour of picking up a camera. I’m sure the Pulitzer Prize committee was thrilled to see your groundbreaking advice on experimenting with fractions. Bravo.
And then there’s “Pay attention to lighting conditions”: Wow, what a revelation! Lighting is indeed crucial in photography. Who would have thought that adjusting shutter speed according to lighting conditions could make a difference? I mean, it’s not like every photography book and online tutorial has been screaming this for years. Your profound insight on reading the light in any given situation must have taken months of dedicated research.
Lastly, “Don’t be afraid to go slow”: Ah, the classic “slower shutter speeds create beautiful effects” argument. How trite. It’s almost as if you’ve never heard of a thing called motion blur before. Newsflash: slower shutter speeds can indeed create interesting effects, but they’re not always desirable or even aesthetically pleasing. Have you ever seen a photo with such heavy motion blur that it looks like the subject is perpetually tripping over its own feet? Exactly.
Let me pose a question to you, Holden: have you ever actually shot a video or taken a photograph in real-world conditions, rather than just spouting generic advice from your armchair of wisdom? I highly doubt it. If you had, you’d know that shutter speed is not just about capturing the essence of a moment; it’s often about freezing motion, creating sharp images, and avoiding the dreaded “wobbly” effect.
In conclusion, Holden, while your comments were certainly… enlightening, they lacked any semblance of depth or originality. I’m sure you’ll continue to regale us with your photography expertise on social media, but please, for the love of all things good and holy, try to bring something new to the table. Or, at the very least, make an effort to sound less like a Google search result from 2012.
Brooks Miles
A Space Odyssey would have loved to “experiment” with fractions instead of actually understanding the exposure times needed to capture the majestic slow-motion sequences).
And then, there’s your advice to “pay attention to lighting conditions”. Wow, I bet no one has ever thought of that before. I mean, it’s not like every photographer and videographer on the planet already knows that lighting is a crucial aspect of capturing images or video footage. But hey, thanks for reminding us that we should pay attention to something that’s literally right in front of our faces.
But the pièce de résistance has got to be your suggestion to “don’t be afraid to go slow”. Oh, please do tell me more about how slower shutter speeds can create beautiful effects like motion blur or creamy bokeh. I’m sure it’s not like every photographer and videographer has already explored these techniques to death (I mean, who needs to understand the basics of exposure and aperture when you can just rely on slow shutter speeds to magically create “beautiful effects”?).
And let’s not forget your parting shot about taking your advice for what it’s worth. Oh, I’m shaking in my boots. I’m sure that your “two cents” is worth at least a few dollars, maybe even a small fortune (after all, who wouldn’t want to pay top dollar for the wisdom of playing with fractions and paying attention to lighting conditions?).
But seriously, Holden, if you’re going to offer advice on shutter speed, perhaps it would be beneficial to actually understand what you’re talking about. Maybe take a few photography classes or read some books on the subject before sharing your “insights” with the world.
As for me, I’ll stick with my own approach: understanding the fundamental principles behind shutter speed and using them to create visually stunning footage that doesn’t rely on magic tricks or guesswork.