Frequently Asked Questions:

How do I properly attach my Lume Cube Smartphone Clip to my device for optimal use with Studio Lighting software?

First, make sure your Lume Cube Smartphone Clip is clean and free of any debris or dust that may prevent a secure connection. Locate the mounting point on your smartphone or tablet where you want to attach the clip. This will typically be the back of the device, near the center or top. Align the Lume Cube Smartphone Clip with the mounting point and press it firmly into place. Make sure the clip is level and centered for optimal performance with Studio Lighting software. Adjust the orientation of your device as needed to ensure that the Lume Cube lighting panel is properly aligned with the camera lens. This will depend on the specific model of your smartphone or tablet, but generally, you'll want to position the lighting panel directly above the lens for best results. Connect the Lume Cube Smartphone Clip to a power source using the included USB cable, and then launch Studio Lighting software on your device.

How do I properly attach and detach the Lume Cube Smartphone Clip from my device?

To attach the Lume Cube Smartphone Clip to your device, first ensure that your phone is clean and free of any debris or dust. Next, locate the adhesive backing on the bottom of the clip and carefully align it with the back of your phone. Press down firmly until the clip is securely attached. To detach the clip from your device, simply grasp the sides of the clip and gently pull it away from the back of your phone. The adhesive should release easily, allowing you to move the clip to a new location or remove it altogether as needed. When storing the clip, be sure to keep it in a clean and dry place to prevent any potential damage to the adhesive backing.

How do I properly attach and use the Lume Cube Smartphone Clip for studio lighting purposes?

To attach and use the Lume Cube Smartphone Clip for studio lighting purposes, follow these steps:

1. Make sure your smartphone is compatible with the clip by checking the manufacturer's specifications. The Lume Cube Smartphone Clip is designed to work with most major smartphone brands and models. Clean both the clip and your smartphone's charging port thoroughly with a microfiber cloth or lens cleaning solution to ensure proper contact between the two. This will prevent any dirt, dust or debris from interfering with the connection. Align the Lume Cube Smartphone Clip's charging connector with your smartphone's charging port and push it firmly into place until you hear a clicking sound. The clip should be securely attached to your device. Turn on the Lume Cube Light by pressing and holding its power button until the LED light ring starts pulsing white. You can also customize the brightness, color temperature or other settings using the Lume Cube app or the physical buttons on the light itself. Place your smartphone in a suitable position for taking photos or videos under the studio lighting setup. The Lume Cube Smartphone Clip's flexible arms and adjustable ball head allow you to position the light at various angles and distances, providing optimal illumination for your subject. Adjust the brightness, color temperature, and other settings as necessary to achieve the desired lighting effect. Remember that brighter is not always better, as too much light can create harsh shadows or glare. Use the Lume Cube Light's diffuser cap or grid filter (both sold separately) if needed to soften or focus the light output. Once you are satisfied with your lighting setup, take your photos or videos using your smartphone's camera app as usual. The Lume Cube Smartphone Clip should provide consistent and high-quality results, thanks to its advanced LED technology and sleek design. To detach the Lume Cube Smartphone Clip from your device, gently pull it away from the charging port while keeping it at an angle that prevents any strain on the connector or the clip's arms. This will help prolong the lifespan of both the light and the smartphone. Remember to always handle the Lume Cube Smartphone Clip and your smartphone with care, as accidental drops or impacts can damage both devices. Additionally, make sure to store the light and its accessories in a dry and secure place when not in use, to prevent any moisture, dust or scratches from affecting their performance.

How do I properly mount and position my Lume Cube Smartphone Clip for optimal lighting in a studio setting?

To mount and position your Lume Cube Smartphone Clip for optimal lighting in a studio setting, follow these steps:

1. Clean the surface where you'll be attaching the clip to ensure a secure hold. Adjust the angle of the clip to direct the light precisely where it's needed. The clip has a ball joint that allows for flexible positioning. Position your smartphone in the holder, making sure it's secure and level. Turn on your Lume Cube lighting unit and adjust the brightness and color temperature as needed to achieve the desired effect. Use a tripod or other support to keep your setup steady and avoid shaky footage or blurry images. Check the exposure settings on your smartphone camera to ensure that the lighting is not overexposed or underexposed, and adjust as necessary. Test your shot to make sure everything looks good before starting your shoot. If you need additional light, consider using multiple Lume Cube Smartphone Clips or additional lighting sources. Always prioritize safety and avoid placing the lights too close to flammable materials or other hazards. Remember to pack up and properly store your equipment at the end of each session to keep it in good condition for future use.

My Lume Cube clip keeps disconnecting from my phone, is it supposed to be this loose or am I doing something wrong when attaching it?

It sounds like you're experiencing some issues with your Lume Cube clip and its connectivity to your phone. Firstly, the Lume Cube clip is designed to be a bit loose on purpose. This allows for easy attachment and detachment from your phone. However, if it's feeling too loose or disconnected, there might be a few reasons why this could be happening. One possible reason is that the clip itself has become worn out over time. The Lume Cube uses a small magnet to attach to your phone, which can lose its strength with repeated use. This can cause the connection to feel looser than it should. Another possibility is that there might be some debris or dirt accumulated on the contact points of either the clip or your phone's case. This can prevent the magnetic connection from happening properly. Lastly, if you're using a phone case that has a metal insert (like a wallet case), this can sometimes interfere with the Lume Cube's ability to connect properly. To resolve this issue, try cleaning both the clip and the contact points on your phone case thoroughly. You can use a soft cloth and some compressed air to do this. If you find any debris or dirt, gently remove it before trying to reconnect the clip again. If none of these suggestions work, it might be worth contacting Lume Cube's customer support for further assistance. They may have more specific advice or even replace your clip if there's a manufacturing defect. But in general, the looseness you're experiencing is probably normal, and cleaning the contact points should resolve the issue.

My Lume Cube light is not turning on, it shows red lights on the back but doesn't charge when plugged into my phone. What's wrong with it?

1. Faulty USB Port**: It's possible that the issue lies with your phone's USB port or the cable itself. Try using a different cable and/or plugging it directly into a wall charger to see if it charges. If it does charge from the wall, then the problem is likely with the phone's USB port. Dead Battery**: It's possible that the battery inside the Lume Cube has simply died. Since you mentioned red lights on the back, it might still be trying to charge but can't due to a dead battery. Try letting it sit for an extended period (like 24 hours) to see if it'll suddenly start charging. Faulty Charging Circuit**: The red lights indicate that the Lume Cube is receiving power, so this suggests that the issue might be with the charging circuit itself. This could be a hardware failure within the device. Water Damage or Corrosion**: If you've been using your Lume Cube near water or in humid environments, it's possible that water has seeped into the device and caused corrosion on the internal components. To diagnose the issue further:

* Try cleaning the charging port of both the phone and the Lume Cube to ensure there are no blockages. Check if the battery is removable (some models have a removable battery). If it's, try taking out the battery for 30 seconds before reinserting it. This can sometimes reset the charging circuit. Consider resetting the Lume Cube by pressing and holding the power button for an extended period (like 10 seconds). If none of these steps resolve the issue, it might be worth contacting Lume Cube's customer support or exploring options for repairing or replacing your unit.