Frequently Asked Questions:

Question: How do I attach my smartphone to the Joby Griptight Mount Pro and use it with the tripod?

Attaching your smartphone to the Joby Griptight Mount Pro and using it with the tripod is a simple process. Follow these steps:

1. Open the Joby GripTight Mount Pro by pressing down on the two sides of the clamp.
2. Place your smartphone in the center of the mount's rubber grip.
3. Close the Joby GripTight Mount Pro by gently squeezing the two sides together. Ensure that your smartphone is securely held in place by the rubber grip.
4. Connect the Joby GripTight Mount Pro to the tripod by inserting the mount's threaded end into the tripod's mounting socket. Make sure the mount is firmly attached to the tripod.
5. Adjust the angle and position of your smartphone using the tripod's adjustable legs and ball head.
6. Position your smartphone for optimal viewing or photography, then secure it in place by tightening the locking knob on the ball head.
7. Your smartphone is now attached to the Job GripTight Mount Pro and ready to use with the tripod.

What is the correct way to attach my phone to the GripTight Mount Pro using a case?

Attaching your phone to the GripTight Mount Pro with a case involves a few extra steps compared to using it without a case. Here's how you can do it:
1. Choose the right mounting plate: The GripTight Mount Pro comes with two mounting plates – one for phones without cases and another for phones with thin cases (up to 0.4 inches/1 cm thick). Make sure you have the correct plate for your phone and case.
2. Remove your phone from its case, if necessary: Depending on the thickness of your phone case, you may need to remove it to attach the mounting plate securely. If your case is thin enough and the plate can grip onto it directly, you might be able to leave it on.
3. Attach the mounting plate: Align the mounting plate with the bottom corners of your phone (or the appropriate side if you're using a different type of mount) and press it firmly against your phone. Make sure all four corners are in contact with the phone and case, if applicable. The plate should click into place once it's securely attached.
4. Reattach your phone case, if removed: If you had to remove your phone case during this process, now is the time to put it back on. Be careful not to press too hard on the mounted phone and plate while reattaching the case.
5. Attach the GripTight Mount Pro to your phone: Once the mounting plate is securely attached to your phone, you can attach the GripTight Mount Pro to it. Align the mount's armband with the center of the phone and slide it over the mounting plate until it clicks into place.
6. Tighten the armband: Once the armband is in place, tighten it by twisting the locking dial at the end of the armband counterclockwise until it's snug but not too tight. Be careful not to overtighten as this may damage your phone or case.
7. Test the mount: Make sure your phone is securely attached to the GripTight Mount Pro and can freely move within the armband without putting too much pressure on the phone or mounting plate. If necessary, adjust the tightness of the armband until you're satisfied with the fit.
Your phone is now ready to be used with the GripTight Mount Pro while attached to its case.

How do I attach my smartphone to the Joby GripTight Mount Pro Tripod?

To attach your smartphone to the Joby GripTight Mount Pro Tripod, follow these steps:
1. Make sure that your phone is compatible with the included Joby BiteMount. The BiteMount has a width range of 2. If you have a larger or smaller device, consider purchasing an additional mount adapter to ensure compatibility. Open the legs of the GripTight Mount Pro tripod and position it in your desired location. The tripod can be adjusted to various heights and angles, allowing for flexibility in your photography setup. Attach the BiteMount to the Joby GripTight Mount Pro tripod by sliding it into the mount's quick-release plate. Make sure that the plate is securely fastened and that the phone is centered and level on the mount. Adjust the orientation of the phone as needed using the ball joint in the BiteMount. This allows for flexibility in your camera angles and positions. Once you're satisfied with your setup, tighten the quick-release plate to securely fasten it to the tripod. Your smartphone is now ready to capture photos and videos!
Note: The Joby GripTight Mount Pro Tripod can also be used with other devices that have a standard 1/4-20 thread, such as cameras or action cameras. In this case, use the included threaded adapter instead of the BiteMount.

How do I attach my phone securely to the Joby GripTight Mount Pro Tripod for stable and clear video recordings?

To attach your phone securely to the Joby GripTight Mount Pro tripod for stable and clear video recordings, follow these steps:

1. Start by making sure that your phone is compatible with the mount. The Joby GripTight Mount Pro can hold devices up to 3. Clean both the mounting plate and the back of your phone with a microfiber cloth to ensure a secure grip. Insert your phone into the mounting plate by aligning the four corners of the phone with the corresponding cutouts in the plate. Press gently until the phone snaps into place. Adjust the angle and orientation of the mount as needed using the flexible, twist-lock ball joint. The mount allows for a full range of motion, so you can position your phone exactly where you need it for the best shot. Attach the mount to the tripod legs by pressing it into one of the two quick-release plates on the bottom of the tripod. The mount will snap securely into place, and you're ready to shoot!

6. If you prefer a more traditional mounting option, you can also attach the GripTight Mount Pro directly to a variety of surfaces using its built-in suction cup or adjustable grip. Remember to always use caution when attaching your phone to the tripod to avoid damaging it or causing injury.

My phone keeps falling off the mount when I'm taking photos in windy conditions, is this normal and are there any solutions or modifications available?

It's not uncommon for phone mounts to fail in windy conditions, but it's frustrating nonetheless. The issue often lies with the design of the mount itself rather than the quality of the product. One solution is to use a wind-protected phone mount. These types of mounts are designed specifically for outdoor use and can withstand harsh weather conditions. They usually come with a protective cover or a cage that surrounds the phone, preventing it from being blown away by strong winds. Another option is to use a magnetic phone mount attached to a metal object such as a bike frame or a car's roof rack. This type of mount is more secure and less likely to be affected by wind. If you're looking for a modification, you could try using a reinforced adhesive strip on the back of your phone mount. This would provide extra grip and prevent it from being blown away. However, this might not be suitable for all types of mounts or surfaces. It's also worth considering the type of mount you're using. Some mounts are designed specifically for certain phones or cases, so make sure you've got a compatible product. Lastly, if you're still experiencing issues with your current phone mount, it might be time to consider upgrading to a more robust and weather-resistant option.

Why is my phone falling off the mount when I'm taking photos in windy conditions?

There are several reasons why your phone may be falling off the mount when you're taking photos in windy conditions. Firstly, the weight and balance of the camera equipment can cause it to shift or sway in the wind. If the equipment is not properly secured or balanced, it can become unstable and prone to falling. Secondly, the mount itself may not be designed to withstand strong winds. Some mounts are specifically designed for use indoors or in calm conditions, while others may be more robust and suitable for outdoor use in windy conditions. Thirdly, the phone may not be properly secured on the mount. If the phone is not snugly fitted onto the mount or if it's not held firmly in place by a strap or other securing device, it can become dislodged in strong winds. Finally, the type of wind you're experiencing may also play a role. If the wind is particularly strong or gusty, it can cause even the most secure equipment to become unstable and fall over. To prevent this from happening in the future, you could try using a more robust mount designed for outdoor use in windy conditions. You could also make sure that your phone is properly secured on the mount and that any straps or other securing devices are tightened securely. Additionally, if possible, try to take photos when the wind is not as strong. It's worth noting that there are some specialized camera mounts available that are specifically designed for use in windy conditions. These mounts often have additional features such as weighted bases or anti-vibration pads that can help keep the equipment stable and secure.