Frequently Asked Questions:

How do I properly connect and power on my Elgato Key Light Air using its included USB-C cable?

Make sure the Key Light Air is in its carrying case to prevent any damage during transportation. Locate the included USB-C cable that came with your Key Light Air. This cable will be used for both data transfer and power delivery. Connect one end of the USB-C cable into the port located on the back of the Key Light Air. The USB-C port is labeled "Input/Output" to distinguish it from other ports. Connect the other end of the USB-C cable into a power source that provides at least 5V and 1. A. This could be a computer, laptop charging adapter, or a USB wall charger with a USB-C output port. Once the Key Light Air is connected to a power source, press and hold the on/off button located on the back of the light until it turns green. The light will automatically start up at 100% brightness, but you can adjust the brightness level using the included remote or the Elgato Stream Deck XL app (if you have one). If you do not see a green light after pressing and holding the on/off button, it could mean that the power source is not providing enough power to the Key Light Air. Make sure the power source meets the required specifications listed above. To conserve power, the Key Light Air will automatically turn off after 12 hours of inactivity. If you want to keep the light on for longer periods of time, simply press and hold the on/off button again until it turns green. When you're done using the Key Light Air, disconnect it from the power source by pulling out the USB-C cable. Make sure the light is fully turned off before storing it in its carrying case for transportation.

"How do I connect my Elgato Key Light Air to my computer using Bluetooth?"

Ensure that your computer has built-in Bluetooth functionality or that you have a separate Bluetooth adapter installed. Turn on your Elgato Key Light Air and put it into pairing mode by holding down the power button for 3 seconds until the LED light starts flashing rapidly. On your computer, go to the Settings app (Windows) or System Preferences (macOS) and select Bluetooth. Make sure that Bluetooth is turned on and that your computer is discoverable by selecting "Make this Mac discoverable" in macOS or toggling the switch next to "Make me discoverable as" in Windows. Your Elgato Key Light Air should appear in the list of available devices. Click on it to select it and then click the "Pair" button (Windows) or wait for the pairing request to appear and click "Accept" (macOS). Once your Elgato Key Light Air is connected, you can control its brightness, color temperature, and other settings using the Elgato Control Center software or a compatible third-party app.

How do I properly set up and operate the Elgato Key Light Air for my video productions as a beginner user with no prior experience in studio lighting?

As a beginner user with no prior experience in studio lighting, here's how you can properly set up and operate the Elgato Key Light Air for your video productions:

1. Unpacking & Setup
- Take out the Key Light Air from its box and ensure that all the necessary accessories (light, stand, power adapter, and user manual) are included. Plug in the light into a power source using the provided power adapter. Attach the light to the stand by connecting the two via the quick release buttons located on both sides of the light and the stand's legs. Adjust the height of the stand as per your requirements, keeping in mind that it can be extended up to 136 cm (54 inches) tall. Position the light and stand in a location where they won't cause any hazards or obstructions, and where you have enough space to move around during filming. Connectivity & Power
- Download and install the Elgato Stream Deck software on your computer from the official website (https://www. Connect the Key Light Air to your computer via USB Type-C using the provided cable. Launch the Elgato Stream Deck software and connect the light to it by following the on-screen instructions. You can now control the brightness, color temperature, and other settings of the Key Light Air from the software interface. Using the Key Light Air
- Turn on the Key Light Air using the power button located at the back of the light. Use the Elgato Stream Deck software to adjust the brightness, color temperature, and other settings as per your requirements. Ensure that you're in a well-lit environment, but avoid any direct sunlight or harsh artificial lighting that could affect the quality of your video. Position yourself in front of the light and check if the lighting is evenly distributed across your face and body. If required, use reflectors or diffusers to bounce or soften the light as needed. Troubleshooting & Maintenance
- In case you're experiencing any issues with the Key Light Air, refer to the user manual for troubleshooting tips and contact Elgato support if necessary. Clean the light and stand regularly using a soft cloth and mild detergent to prevent dust accumulation that could affect its performance. Store the Key Light Air in a dry and cool place away from direct sunlight, moisture, or heat sources. Remember, the key to getting the most out of your Elgato Key Light Air is to practice regularly and experiment with different settings and techniques until you find what works best for your specific needs and preferences.