Frequently Asked Questions:

What is the recommended distance from the microphone to the sound source while using the Fishman PRO-REP-103 Rare Earth pickup on an acoustic guitar?

The recommended distance for using the Fishman PRO-REP-103 Rare Earth pickup on an acoustic guitar varies depending on the player's preference and the desired sound. Typically, a distance of 2 to 4 inches (5 to 10 cm) from the sound hole is suggested as a starting point for experimenting with the best possible sound.

Remember that there's no one-size-fits-all solution when it comes to microphone placement or distance, and individual preferences can greatly influence the final result. Therefore, always feel free to adjust the position of your Fishman PRO-REP-103 Rare Earth pickup to find the best sound for your playing style and acoustic guitar setup.

How do I properly mount and position the Fishman PRO-REP-103 Rare Earth microphone for optimal sound quality during live performances?

To mount and position the Fishman PRO-REP-103 Rare Earth microphone for optimal sound quality during live performances, follow these steps:

1. Determine the placement of the microphone on your acoustic guitar. The microphone can be mounted on the inside or outside of the body. If mounted inside, place it near the soundhole; if mounted outside, position it close to the 12th fret. Use the included adhesive mounting tape to securely attach the microphone to your guitar. Make sure the microphone is level and centered. Run the output cable from the microphone to the Fishman PRO-PRE-103 preamp, which should be mounted in a convenient location near the soundhole or on the side of the guitar. Use the included cable clip to securely attach the cable to the body of the guitar. Connect the preamp to your mixing console or amplifier using an XLR cable. Make sure the cable is securely connected and not pinched or twisted. Adjust the volume, tone, and presence controls on the preamp to achieve optimal sound quality. These controls allow you to fine-tune the microphone's output to match your playing style and the acoustics of the performance space. Use the included battery (a single 9V) to power both the microphone and preamp. The battery should be inserted into the back of the preamp, which is also where you will find the on/off switch. Test your setup by playing a few notes or chords and adjusting the controls as needed. Make sure the sound quality is clear, crisp, and balanced throughout the frequency range. If you experience any issues with the microphone or preamp, consult the user manual for troubleshooting tips or contact Fishman customer support for assistance. By following these steps, you can ensure that your Fishman PRO-REP-103 Rare Earth microphone and preamp are properly mounted, positioned, and connected for optimal sound quality during live performances.

"How do I properly install and position the Fishman PRO-REP-103 Rare Earth pickup on my acoustic guitar for optimal sound quality during live performances?"

Installing a Fishman PRO-REP-103 Rare Earth pickup on your acoustic guitar can greatly enhance its sound quality during live performances. Here's how to properly install and position the pickup:

Materials needed:
- Fishman PRO-REP-103 Rare Earth pickup
- Screwdriver or pickup wrench (included in the package)
- Electric guitar amplifier (optional)

Step 1: Choose the right location for the pickup
The first step is to select the best spot on your guitar where you want to install the pickup. The Fishman PRO-REP-103 Rare Earth pickup is typically placed under the saddle, where it can capture the vibrations of the strings more accurately and deliver a richer and clearer sound. Step 2: Remove the old pickup (if any)
If your guitar already has an existing pickup, remove it carefully using a screwdriver or the provided wrench. Make sure to keep all the screws in a safe place so you can use them later. Step 3: Install the Fishman PRO-REP-103 Rare Earth pickup
Attach the new pickup to your guitar by aligning it with the pre-drilled holes and securing it with the provided screws. Make sure that the pickup is leveled and flush with the surface of the guitar, so it doesn't interfere with the strings or affect its intonation. Step 4: Connect the pickup to your amplifier (optional)
If you want to test the sound quality right away, connect the pickup to an electric guitar amplifier using a standard instrument cable. You can adjust the volume and tone settings on both the pickup and the amplifier to find the optimal balance between the acoustic and electric sounds. Step 5: Adjust the pickup placement for your playing style
The exact position of the pickup may affect its sensitivity and response, depending on how you play the guitar. Experiment with different placements around the saddle area until you find the one that suits your style best. Some players prefer to place it closer to the bridge, while others prefer a more central location. Step 6: Fine-tune the sound using EQ and other tools
Even after installing the pickup in the right position, you may still need to fine-tune its tone using an equalizer or other audio processing tools. For example, you can boost the lows and highs to enhance the richness and clarity of your guitar's sound, or cut certain frequencies to reduce feedback or unwanted noises. Overall, installing and positioning a Fishman PRO-REP-103 Rare Earth pickup on your acoustic guitar is a straightforward process that can greatly improve its performance in live situations. By following these steps and experimenting with different placements and settings, you can achieve the optimal sound quality for your playing style and preferences.

"How can I properly position the Fishman PRO-REP-103 Rare Earth pickup on my acoustic guitar to achieve optimal sound quality during live performances?"

To ensure optimal sound quality when using the Fishman PRO-REP-103 Rare Earth pickup for your live performances, follow these steps:

1. Clean the surface where you intend to mount the pickup. This will help prevent any interference with the electrical signals produced by the pickup. You can use a soft cloth and isopropyl alcohol to clean the area. Place the pickup in the correct position according to its intended placement for your particular guitar model. For example, some guitars require that the pickup be placed near the bridge while others may need it closer to the neck. Consult the Fishman website or a knowledgeable music store salesperson for specific guidance on this matter. Use a ruler or other straight edge to ensure that the pickup is positioned directly underneath the strings you intend to capture sound from. This will help prevent any unwanted feedback during your performance. Secure the pickup firmly in place using the provided adhesive and screws. Be sure not to over-tighten the screws, as this can cause damage to the pickup or the guitar's finish. Connect the pickup to your amplifier or other sound system according to the manufacturer's instructions. You may need to adjust the volume and tone controls on your amp or pedalboard to achieve the desired sound. Test the pickup during a rehearsal or low-stakes performance to ensure that it is capturing the correct sounds and producing the optimal level of feedback suppression. If necessary, make minor adjustments to the placement or positioning of the pickup until you are satisfied with the results. By following these steps, you can help ensure that your Fishman PRO-REP-103 Rare Earth pickup is positioned correctly for optimal sound quality during your live performances. Remember to always treat your guitar and equipment with care and respect, and never exceed the manufacturer's recommended weight or pressure limits when attaching accessories like this pickup.